Please wait a minute...
img

官方微信

遥感技术与应用  2005, Vol. 20 Issue (5): 521-525    DOI: 10.11873/j.issn.1004-0323.2005.5.521
技术研究与图像处理     
调频脉冲串相参合成研究与FPGA硬件实现
王 沛 1,2 , 杨汝良 2
1.中国科学院电子学研究所,北京 100080 2.中国科学院研究生院,北京 100049
Synthetic Bandwidth of Stepped Chirp Study and Implement
WANG Pei 1,2 , YANG Ru liang 2
1.Institute of Electronics Chinese Academy of Sciences, Beijing 100080, China; 2.Graduate School of the Chinese Academy of Sciences, Beijing 100039, China
 全文: PDF 
摘要:

介绍了利用调频脉冲串合成宽带信号的原理,进行了合成宽带信号的仿真。给出了基于FPGA的调频脉冲串产生的硬件实现电路。利用该电路得到了中频信号的测量波形,通过后处理将3个30MHz带宽的子脉冲合成了等效带宽90MHz的信号。验证了用调频脉冲串合成宽带信号来提高雷达距离分辨率方法的正确性和有效性,及其工程可行性。

关键词: 调频脉冲串 相参 FPGA 合成带宽    
Abstract:

High range resolution(HRR) is an important aspect of the development of Synthetic Aperture Radar. High resolution in range is in proportion to the bandwidth of transmitted signal. In the application of space bore SAR, the increase of system instantaneous bandwidth will cause much difficult in generating, transmission and receiving of the signal for the limitation of hardware. So generation of wide bandwidth signals in current hardware level, and improvement of range resolution with no increasing of system instantaneous bandwidth by employing new waveforms have significant meaning and high practical value. The synthetic bandwidth technique employed stepped chirp is one effective method with such characteristic. The principle of the method is introduced, and simulation of synthetic bandwidth is carried out. The hardware circuit of the generation of stepped chirp based on FPGA is Presented. The experimental result of the generator output on the medium frequency is acquired, and then the combination of 3 sub |pulse with 30 MHz bandwidth to one 90 MHz bandwidth signal is implemented, which show that high range resolution by means of synthetic bandwidth generated by stepped chirp is correct, effective and practical.

Key words: Stepped chirp    Coherence    FPGA    Synthetic bandwidth
收稿日期: 2005-03-31 出版日期: 2011-11-17
:  TN 952  
作者简介: 王沛(1977-),男,硕士研究生,主要从事合成孔径雷达宽带信号源的研究。
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
王沛
杨汝良

引用本文:

王沛, 杨汝良. 调频脉冲串相参合成研究与FPGA硬件实现[J]. 遥感技术与应用, 2005, 20(5): 521-525.

WANG Pei, Yang Ru-Liang. Synthetic Bandwidth of Stepped Chirp Study and Implement. Remote Sensing Technology and Application, 2005, 20(5): 521-525.

链接本文:

http://www.rsta.ac.cn/CN/10.11873/j.issn.1004-0323.2005.5.521        http://www.rsta.ac.cn/CN/Y2005/V20/I5/521

〔1〕
[ZK(2*2#]张澄波.综合孔径雷达原理,系统分析与应用〔M〕.北京:科学技术出版社,1989. 〔2〕 林茂庸,柯有安.雷达信号理论〔M〕.北京:国防工业出版社,1981. 〔3〕 Lord R T, Inggs M R. High Range Resoutilon Radar Using Narrowband Linear Chirps Offset in Frequency, Proc〔A〕. IEEE South African Symp. On Communications and Signal Processing
[C],COMSIG'97,Grahamstown,South Africa,September 1997. 〔4〕 李海英.超宽带信号波形及其合成孔径雷达成像研究〔D〕.博士论文,2002. 〔5〕 祝明波,常文革,梁甸农.采用数字方法实现宽带线性调频信号产生〔J〕.系统工程与电子技术,2002,22(5):93~96.

[1] 蒋松, 蓝爱兰,阎敬业,孙林. AgileDARN雷达数字信号处理的FPGA实现[J]. 遥感技术与应用, 2017, 32(6): 1064-1070.
[2] 陆 浩,王振占. 全极化微波辐射计中5 GHz带宽数字相关器设计[J]. 遥感技术与应用, 2012, 27(2): 305-309.
[3] 付文君, 姜景山, 王拴荣, 吕 娈. 一种可变插值比的脉冲成型数字滤波器FPGA 设计[J]. 遥感技术与应用, 2006, 21(5): 445-449.
[4] 徐 锋, 冯正勇. 基于RocketIO的SAR 雷达系统高速串行传输的实现[J]. 遥感技术与应用, 2006, 21(2): 125-129.
[5] 徐锋,禹卫东,唐红,谢东东. 基于FPGA的SAR预处理器中FIR滤波器的实现[J]. 遥感技术与应用, 2004, 19(4): 266-270.